T: +86-15888736999
No.67, Wutong Rd, Three-Two Rd Binhai Industrial Park, Economic & Technoloical Development Zone, Wenzhou, Zhejiang, China
| Quantity: | |
|---|---|
Q01.5
Application:
With experiences accumulated through years and deep talks conducted between end users of fluid pipelines,we are able to continously optimize the design and structure of ball valves.
Blow out proof stem adds safety and reliability to the full extent.
Thickened stem packing;V-shaped stacking design;Adjustable self-compensating gland.
Multiple control modes.Easy to realize remote or automatic control.
All sealing materials contacting with fluids are reinforced PTFE,in accordance with FDA177.1550 and GMP standards
Support CIP(clean-in-place) and SIP(sterilization-in-place)
Flexible 3-PCS Design:
3-PCS ball valves are flexible to set up and easy to maintained online or offline,which significantly minimizes the production downtime due to valve or pipeline maintenance.During maintenance ,it is not necessary to disassemble the actuator or joint component from the valve.When the maintenance is completed ,it is also convenient to re-amount the valve or actuator components;no calibration is needed.
Strict Assembly Procedure:
To prevent contamination,all components,after processing ,shall be put in an ultrasonic cleaning sink and cleaned with special solutions to remove oil and grease.Assembly and calibration shall be carried out in a designated cleaning room,so as to make sure that every ball valve can be used in a sanitary system.
Application:
With experiences accumulated through years and deep talks conducted between end users of fluid pipelines,we are able to continously optimize the design and structure of ball valves.
Blow out proof stem adds safety and reliability to the full extent.
Thickened stem packing;V-shaped stacking design;Adjustable self-compensating gland.
Multiple control modes.Easy to realize remote or automatic control.
All sealing materials contacting with fluids are reinforced PTFE,in accordance with FDA177.1550 and GMP standards
Support CIP(clean-in-place) and SIP(sterilization-in-place)
Flexible 3-PCS Design:
3-PCS ball valves are flexible to set up and easy to maintained online or offline,which significantly minimizes the production downtime due to valve or pipeline maintenance.During maintenance ,it is not necessary to disassemble the actuator or joint component from the valve.When the maintenance is completed ,it is also convenient to re-amount the valve or actuator components;no calibration is needed.
Strict Assembly Procedure:
To prevent contamination,all components,after processing ,shall be put in an ultrasonic cleaning sink and cleaned with special solutions to remove oil and grease.Assembly and calibration shall be carried out in a designated cleaning room,so as to make sure that every ball valve can be used in a sanitary system.
