T: +86-15888736999
No.67, Wutong Rd, Three-Two Rd Binhai Industrial Park, Economic & Technoloical Development Zone, Wenzhou, Zhejiang, China
| Quantity: | |
|---|---|
G02/G03
NUOMENG
T-shaped valve body has a barrage inside which is tangent to the internal contour line of the main channel,in a proper angle so that media can be discharged automatically and there is basically no retenion.Preferably ,T-shaped body is welded,in an annular way,vertically into the outlet of the main channel.The position ensures that the media can be easily drained.T-shaped body can also be applied in main loops,such as the sampling channel of DN50/DN15 sampling valve and the welded elbow of U shaped three-way diaphragm(can be used for cleaning).
The cavity is molded into a whole body,with dead corners smaller than 1D.Being compact in design,when set up in a specific angle,the valve can achieve the maximum effect in drainage.
| Technical Parameters: | ||
| Operation | Manual/Pneumatic | |
| DN | DN15-DN100 | |
| Body Material | ASTM A351:CF3M | ASTM A182:F316L 904L 2205 2507 |
| ASTM B564:C276 C22 | GB/T 2965 TA2 TA10 | |
| Cap and Core Material | ASTM A351 CF8 | |
| Connection | Welded,Clamped&Flange | |
| Operation Pressure | DN15-DN100 PN10bar AISI:145psi | |
| Operation Temperature | Dependent on diaphragm materials | |
| Diaphragm Material | EPDM;EPDM+PTFE,EPDM/PTFE | |
| Medium-contacting inner surface roughness;≤Ra0.4㎛ ≤Ra0.25㎛ | ||
T-shaped valve body has a barrage inside which is tangent to the internal contour line of the main channel,in a proper angle so that media can be discharged automatically and there is basically no retenion.Preferably ,T-shaped body is welded,in an annular way,vertically into the outlet of the main channel.The position ensures that the media can be easily drained.T-shaped body can also be applied in main loops,such as the sampling channel of DN50/DN15 sampling valve and the welded elbow of U shaped three-way diaphragm(can be used for cleaning).
The cavity is molded into a whole body,with dead corners smaller than 1D.Being compact in design,when set up in a specific angle,the valve can achieve the maximum effect in drainage.
| Technical Parameters: | ||
| Operation | Manual/Pneumatic | |
| DN | DN15-DN100 | |
| Body Material | ASTM A351:CF3M | ASTM A182:F316L 904L 2205 2507 |
| ASTM B564:C276 C22 | GB/T 2965 TA2 TA10 | |
| Cap and Core Material | ASTM A351 CF8 | |
| Connection | Welded,Clamped&Flange | |
| Operation Pressure | DN15-DN100 PN10bar AISI:145psi | |
| Operation Temperature | Dependent on diaphragm materials | |
| Diaphragm Material | EPDM;EPDM+PTFE,EPDM/PTFE | |
| Medium-contacting inner surface roughness;≤Ra0.4㎛ ≤Ra0.25㎛ | ||
