T: +86-15888736999
No.67, Wutong Rd, Three-Two Rd Binhai Industrial Park, Economic & Technoloical Development Zone, Wenzhou, Zhejiang, China
| Quantity: | |
|---|---|
G10
NUOMENG
Application:
The temperature of fluorine(plastic) lined valves should not be higher than 30% ofits upper limit.
According to public information,the operation temperature of fluorine(plastic) lined valve varies from differenct materials:PTFE(-60 to 150℃），souluble PTFE PFA(-60 to 180℃),and PTFE F46(-20 to 120℃).However,the actual temperature will be different.because of different materials and pressure .In the long run,the temperature should generally be about 30% lower than the upper limit,otherwise,the lining of each component of the valve can easily be deformed,resulting in learge leakage or failure to open/close the valve normally.
| No. | Name | Material | No. | Name | Material | |
| 1 | Valve Body | CF8+PTFE | 15 | Nut | 304 | |
| 2 | Diaphragm | PFA | 16 | Link Block | 304 | |
| 3 | Membrane | EPDM | 17 | Nut | 304 | |
| 4 | Hexagon Screw | 304 | 18 | Valve Stem | 304 | |
| 5 | Valve Core | CF8 | 19 | O-type Gasket | NBR | |
| 6 | Valve Cap | CF8 | 20 | Pneumatic Head | AL | |
| 7 | Air Faucet | PA6 | 21 | Valve | AL | |
| 8 | O-type Gasket | NBR | 22 | Spring | 60Si2MnA | |
| 9 | Grease Seal | NBR | 23 | Spring Washer | 304 | |
| 10 | Gasket | 304 | 24 | Hexagon Screw | 304 | |
| 11 | Nut | 304 | 25 | Screw | 304 | |
| 12 | Spring | 30Si2MnA | 26 | Hexagon Screw | 304 | |
| 13 | Pointer | ABS | 27 | Spring Washer | 304 | |
| 14 | Cap | PC | 28 | Screw | 304 |
Application:
The temperature of fluorine(plastic) lined valves should not be higher than 30% ofits upper limit.
According to public information,the operation temperature of fluorine(plastic) lined valve varies from differenct materials:PTFE(-60 to 150℃），souluble PTFE PFA(-60 to 180℃),and PTFE F46(-20 to 120℃).However,the actual temperature will be different.because of different materials and pressure .In the long run,the temperature should generally be about 30% lower than the upper limit,otherwise,the lining of each component of the valve can easily be deformed,resulting in learge leakage or failure to open/close the valve normally.
| No. | Name | Material | No. | Name | Material | |
| 1 | Valve Body | CF8+PTFE | 15 | Nut | 304 | |
| 2 | Diaphragm | PFA | 16 | Link Block | 304 | |
| 3 | Membrane | EPDM | 17 | Nut | 304 | |
| 4 | Hexagon Screw | 304 | 18 | Valve Stem | 304 | |
| 5 | Valve Core | CF8 | 19 | O-type Gasket | NBR | |
| 6 | Valve Cap | CF8 | 20 | Pneumatic Head | AL | |
| 7 | Air Faucet | PA6 | 21 | Valve | AL | |
| 8 | O-type Gasket | NBR | 22 | Spring | 60Si2MnA | |
| 9 | Grease Seal | NBR | 23 | Spring Washer | 304 | |
| 10 | Gasket | 304 | 24 | Hexagon Screw | 304 | |
| 11 | Nut | 304 | 25 | Screw | 304 | |
| 12 | Spring | 30Si2MnA | 26 | Hexagon Screw | 304 | |
| 13 | Pointer | ABS | 27 | Spring Washer | 304 | |
| 14 | Cap | PC | 28 | Screw | 304 |
