T: +86-15888736999
No.67, Wutong Rd, Three-Two Rd Binhai Industrial Park, Economic & Technoloical Development Zone, Wenzhou, Zhejiang, China
| Quantity: | |
|---|---|
Q08
Features:
Blow-out proof stem.
First stage of sealing:the taper-shaped stem seal can effectively prevent the leakage of the medium during the rotation of stem,and can also effectively prevent leakage under abnormal pressure boosting conditions.
Second stage of sealing :a set of V-shaped composite packing expands on both sides after being compressed,thus preventing leakage
Release the dis spring preload and automatically compensate for packing and stem seal wear
Use the stem nut to compress all the stem sealing system to prevent leakage.
The check washer secures the stem nut and prevents it from loosening.
| No. | Name | Material | No. | Name | Material | |
| 1 | Valve body | SS/HC/Ti | 10 | Screw | 304 | |
| 2 | Valve cap | SS/HC/Ti | 11 | Gland | 304 | |
| 3 | Ball core | SS/HC/Ti | 12 | Bolt | 304 | |
| 4 | Body seal | PTFE | 13 | Spring washer | 304 | |
| 5 | Valve stem | SS/HC/Ti | 14 | Spacer | PTFE | |
| 6 | Cap seal | PTFE | 15 | Spacer | PTFE | |
| 7 | O-type Gasket | FKM | 16 | V-seal components | PTFE | |
| 8 | Nut | 304 | 17 | Gland | SS/HC/Ti | |
| 9 | Press nail | 304 | 18 | Screw | 304 | |
| 19 | Pull Handle | 304 |
Features:
Blow-out proof stem.
First stage of sealing:the taper-shaped stem seal can effectively prevent the leakage of the medium during the rotation of stem,and can also effectively prevent leakage under abnormal pressure boosting conditions.
Second stage of sealing :a set of V-shaped composite packing expands on both sides after being compressed,thus preventing leakage
Release the dis spring preload and automatically compensate for packing and stem seal wear
Use the stem nut to compress all the stem sealing system to prevent leakage.
The check washer secures the stem nut and prevents it from loosening.
| No. | Name | Material | No. | Name | Material | |
| 1 | Valve body | SS/HC/Ti | 10 | Screw | 304 | |
| 2 | Valve cap | SS/HC/Ti | 11 | Gland | 304 | |
| 3 | Ball core | SS/HC/Ti | 12 | Bolt | 304 | |
| 4 | Body seal | PTFE | 13 | Spring washer | 304 | |
| 5 | Valve stem | SS/HC/Ti | 14 | Spacer | PTFE | |
| 6 | Cap seal | PTFE | 15 | Spacer | PTFE | |
| 7 | O-type Gasket | FKM | 16 | V-seal components | PTFE | |
| 8 | Nut | 304 | 17 | Gland | SS/HC/Ti | |
| 9 | Press nail | 304 | 18 | Screw | 304 | |
| 19 | Pull Handle | 304 |
