T: +86-15888736999
No.67, Wutong Rd, Three-Two Rd Binhai Industrial Park, Economic & Technoloical Development Zone, Wenzhou, Zhejiang, China
| Quantity: | |
|---|---|
G01D
NUOMENG
Suitable for inert and corrosive liquid and gaseous media
Handwheel is chemical resistant
Valve body and diaphragm are available in a variety of materials
Compact design
To open up or close off the valve,rotate the handwheel.While rotate the handwheel.While rotatin,the handwheel will not move up and down.Rather,the stem will.
Technical Parameters:
Operation | Plastic handwheel,regulator&position indicator | ||
DN | DN15-DN50 | ||
Body | one-channel body , T-shaped body , tank bottom type body , multi-channel body | ||
Body Material | ASTM A351： CF3M | ASTM A182: F316L 904L 2205 2507 | |
ASTM B564: C276 C22 | GB/T 2965 TA2 TA10 | ||
Cap and Core Material | ASTM A351 CF8 | ||
Connection | Welded , Clamped & Flange | ||
OperationPressure | DN10-DN50 PN10bar AISI:145psi | ||
Operation Temperature | Dependent on diaphragm material | ||
Diaphragm Material | EPDM+PTFE separate type:temperature range -10 ~ 135℃;steam sterilization at 150℃ with no time duration limited. | ||
EPDM+PTFE compound type: temperature range -10 ~ 100℃; steam sterilization at 135℃ with every cycle reaching 60min | |||
EPDM type: temperature range -10 ~ 100℃; steam sterilization at 135℃ with every cycle reaching 60mi | |||
Medium-contacting inner surface roughness： ≤Ra0.4μm ≤Ra0.25μm | |||
Suitable for inert and corrosive liquid and gaseous media
Handwheel is chemical resistant
Valve body and diaphragm are available in a variety of materials
Compact design
To open up or close off the valve,rotate the handwheel.While rotate the handwheel.While rotatin,the handwheel will not move up and down.Rather,the stem will.
Technical Parameters:
Operation | Plastic handwheel,regulator&position indicator | ||
DN | DN15-DN50 | ||
Body | one-channel body , T-shaped body , tank bottom type body , multi-channel body | ||
Body Material | ASTM A351： CF3M | ASTM A182: F316L 904L 2205 2507 | |
ASTM B564: C276 C22 | GB/T 2965 TA2 TA10 | ||
Cap and Core Material | ASTM A351 CF8 | ||
Connection | Welded , Clamped & Flange | ||
OperationPressure | DN10-DN50 PN10bar AISI:145psi | ||
Operation Temperature | Dependent on diaphragm material | ||
Diaphragm Material | EPDM+PTFE separate type:temperature range -10 ~ 135℃;steam sterilization at 150℃ with no time duration limited. | ||
EPDM+PTFE compound type: temperature range -10 ~ 100℃; steam sterilization at 135℃ with every cycle reaching 60min | |||
EPDM type: temperature range -10 ~ 100℃; steam sterilization at 135℃ with every cycle reaching 60mi | |||
Medium-contacting inner surface roughness： ≤Ra0.4μm ≤Ra0.25μm | |||
