Sanitary Stainless Steel Centrifugal Pumps

Sanitary Stainless Steel Centrifugal Pumps

Sanitary Stainless Steel Centrifugal Pumps Application: Centrifugal pump is an efficient and economical pump, it is both meeting the requirements of the hygiene and smoothly handling of product, and it also has chemical stability. Thus, it is applies to most hygienic fields.

Details introduction:
Basic Info.

  • Model NO.: NMLX
  • Working Pressure: Low Pressure Pump
  • Position of Pump Shaft: Horizontal Pump
  • Mounting Height: Suction Centrifugal
  • Usage: Pump
  • Sealing Elements: EPDM
  • Flow: 10ton/H
  • Max Inlet Pressure: 500kpa(5bar)
  • Noise Level(Distance of 1 Meter): 60-85db(a)
  • Water Consumption: 0.25~0.5L/H
  • Transport Package: in Carton, Plywood Case
  • Origin: Wenzhou, China
  • Impeller Number: Single-Stage Pump
  • Influent Type of Impeller: Single Suction Pump
  • Pump Casing Combined: Horizontal Split Pumps
  • Impeller: Closed
  • Material: Stainless Steel 304, 316L
  • Power: 2.2kw
  • Lift: 24m
  • Temperature Range: -10 to 140degree Celsuis
  • Pressure: Max500kpa(5bar)
  • Trademark: Nuomeng, OEM
  • Specification: 3A, SMS, DIN, ISO

Product Description

Sanitary Stainless Steel Centrifugal Pumps
Application:
Centrifugal pump is an efficient and economical pump, it is both meeting the requirements of the hygiene and smoothly handling of product, and it also has chemical stability. Thus, it is applies to most hygienic fields.

Design Standards:
The basic components of BAW centrifugal pump is including a standard motor, spindle, expansion couplings, converters, backboard, impeller, pump case and shaft seal.
BAW centrifugal pumps for sanitary applications have stainless steel case shields for the protection of the motor, and each pump unit equipped with a complete set of four stainless steel support  feet that can be adjustable.
NUOMENG's centrifugal pumps'special design of amplifying outlet and advanced impeller allows smooth flow and meets the minimum NPSH requirements (minimum requirements can be reduced NPSH cavitation phenomena occur). This product can be cleaned by CIP or by hand. It also has cleanable seal.

Technical data:
Power: 2.2kw
Flow: 10T/H
Lift: 24M
Max inlet pressure: 500kpa(5bar)
Temperature range of EPDM: -10-+140 ÂșC
Noise level(Distance of 1 meter): 60-85Db(A)
Pressure: Max500kpa(5Bar)
Water consumption: 0.25~0.5L/H

Material:
Steel Part: 304/316L
Seal: EPDM

Motor: 
With a basic flange mater, according to IEC metric standard. When the Voltage frequency 50/60Hz, two electrodes is 3000/3600rpm

Frequency, Voltage and Power(3~phase Electricity)
50HZ, 220-240V/380-420V<4KW(Recommended)
60HZ, 250-280V/440-480VY<6KW

 

Type Flow (ton/h) Distance(M) Power(kw) Entrance diameter
NMLX-3-16 3 16 0.75 1.5"/1.5"
NMLX-5-15 5 15 1.1 1.5"/1.5"
NMLX-6-22 6 22 1.5 1.5"/1.5"
NMLX-10-20 10 20 1.5 1.5"/1.5"
NMLX-15-18 15 18 2.2 1.5"/1.5"
NMLX-20-16 20 16 2.2 1.5"/1.5"
NMLX-3-24 3 24 1.5 2"/1.5"
NMLX-5-24 5 24 1.5 2"/1.5"
NMLX-10-23 10 23 2.2 2"/1.5"
NMLX-15-20 15 20 2.2 2"/1.5"
NMLX-25-20 25 20 3 2"/1.5"
NMLX-5-30 5 30 2.2 2"/1.5"
NMLX-10-25 10 25 2.2 2"/1.5"
NMLX-10-32 10 32 3 2"/1.5"
NMLX-15-24 15 24 3 2"/2"
NMLX-20-25 20 25 4 2"/2"
NMLX-30-25 30 25 5.5 2.5"/2"
NMLX20-35 20 35 5.5 2"/2"
NMLX-30-32 30 32 5.5 2.5"/2"
NMLX-40-30 40 30 7.5 2.5"/2"
NMLX-5-50 5 50 3 2"/1.5"
NMLX-10-40 10 40 3 2"/1.5"
NMLX-10-50 10 50 4 2"/1.5"
NMLX-15-45 15 45 5.5 2"/1.5"
NMLX-30-36 30 36 7.5 2.5"/2"
NMLX-10-36 10 36 7.5 2.5"/1.5"
NMLX-10-60 10 60 11 2.5"/1.5"
NMLX-20-75 20 75 11 2.5"/1.5"
NMLX-25-60 25 60 11 2.5"/2"
NMLX-30-60 30 60 15 2.5"/2"
NMLX-30-65 30 65 15 2.5"/2"
NMLX-20-73 20 73 15 2.5"/2"
NMLX-25-70 25 70 15 2.5"/2"
NMLX-30-68 30 68 15 2.5"/2"
NMLX-50-25 50 25 11 2.5"/2"
NMLX-30-45 30 45 11 2.5"/2.5"
NMLX-40-45 40 45 11 2.5"/2.5"
NMLX-60-40 60 40 15 3"/2.5"