Sanitary Stainless Steel BAW Centrifugal Pumps

Sanitary Stainless Steel BAW Centrifugal Pumps

Sanitary Stainless Steel BAW Centrifugal Pumps (type 1) with Bilge Application: BAW Centrifugal pump is an efficient and economical pump both due to meeting the requirements of the health and gentle handling of product and to its chemical stability. It is applies to most fields of the sanitary industry.

Details introduction:

Basic Info.

  • Model NO.: NMCP001.1
  • Max.Capacity: >400 L/min
  • Impeller Number: Single-Stage Pump
  • Influent Type of Impeller: Single Suction Pump
  • Pump Casing Combined: Horizontal Split Pumps
  • Impeller: Closed
  • Material: Stainless Steel 304, 316L
  • Power: 2.2kw
  • Lift: 24m
  • Temperature Range of Seal (EPDM): -10 to 140 Degrees Celsius
  • Double-End Mechanical Seal Inlet Pressur: Max 500kpa (5bar)
  • Trademark: NUOMENG, OEM
  • Specification: 3A, SMS, DIN, ISO
  • HS Code: 84137090
  • Max.Head: 110m-150m
  • Driving Type: Motor
  • Working Pressure: Low Pressure Pump
  • Position of Pump Shaft: Horizontal Pump
  • Mounting Height: Suction Centrifugal
  • Usage: Pump
  • Sealing Elements: EPDM
  • Flow: 10 Ton/H
  • Max Inlet Pressure: 500kpa(5bar)
  • Noise Level (Distance of 1 Meter): 60-85dB(a)
  • Water Consumption: 0.25-0.5L/H
  • Transport Package: in Carton, Plywood Case
  • Origin: Wenzhou, China

Product Description

Sanitary Stainless Steel BAW Centrifugal Pumps (type 1) with Bilge

Application:
BAW Centrifugal pump is an efficient and economical pump both due to meeting the requirements of the health and gentle handling of product and to its chemical stability. It is applies to most fields of the sanitary industry.

Design Standards:
The basic components of SAW centrifugal pump included: A standard motor, spindle, expansion couplings, converters, backboard, impeller, pump case and shaft seal.
BAW centrifugal pumps for sanitary applications have stainless steel case shields for the protection of the Mazda, and each pump unit equipped with a complete set of four stainless steel support can be adjustable feet.
RITER's centrifugal pumps'special design of amplifying outlet and advanced impeller allows smooth flow and meets the minimum NPSH requirements (minimum requirements can be reduced NPSH cavitation phenomena occur). This product can be cleaned by CIP or by hand. It also has cleanable seal.

Technical data:
Power: 2.2kw Flow: 10T/H Lift: 24M
Max inlet pressure: 500kpa(5bar)
Temperature range: -10-+140degree
Noise level(Distance of 1 meter): 60-85Db(A)
Pressure: Max500kpa(5Bar): Water consumption: 0.25~0.5L/H

Material:
Teel PART: 304/316L
Seal: EPDM

Motor: With a basic flange mater, according to IEC metric standard. When the Voltage frequency 50/60Hz, two electrodes is 3000/3600rpm
Frequency, Voltage and Power(3~phase Electricity)
50HZ, 220-240V/380-420V<4KW(Recommended)
60HZ, 250-280V/440-480VY<6KW

Type Flow(ton/h) Distance(M) Power (kw) Entrance diameter
NMLX-3-16 3 16 0.75 1.5"/1.5"
NMLX-5-15 5 15 1.1 1.5"/1.5"
NMLX-6-22 6 22 1.5 1.5"/1.5"
NMLX-10-20 10 20 1.5 1.5"/1.5"
NMLX-15-18 15 18 2.2 1.5"/1.5"
NMLX-20-16 20 16 2.2 1.5"/1.5"
NMLX-3-24 3 24 1.5 2"/1.5"
NMLX-5-24 5 24 1.5 2"/1.5"
NMLX-10-23 10 23 2.2 2"/1.5"
NMLX-25-20 25 20 3 2"/1.5"
NMLX-5-30 5 30 2.2 2"/1.5"
NMLX-10-25 10 25 2.2 2"/1.5"
NMLX-10-32 10 32 3 2"/1.5"
NMLX-15-24 15 24 3 2"/2"
NMLX-20-25 20 25 4 2"/2"
NMLX-30-25 30 25 5.5 2.5"/2"
NMLX20-35 20 35 5.5 2"/2"
NMLX-30-32 30 32 5.5 2.5"/2"
NMLX-40-30 40 30 7.5 2.5"/2"
NMLX-5-50 5 50 3 2"/1.5"
NMLX-10-40 10 40 3 2"/1.5"
NMLX-10-50 10 50 4 2"/1.5"
NMLX-15-45 15 45 5.5 2"/1.5"
NMLX-30-36 30 36 7.5 2.5"/2"
NMLX-10-36 10 36 7.5 2.5"/1.5"
NMLX-10-60 10 60 11 2.5"/1.5"
NMLX-20-75 20 75 11 2.5"/1.5"
NMLX-25-60 25 60 11 2.5"/2"
NMLX30-60 30 60 15 2.5"/2"
NMLX-30-65 30 65 15 2.5"/2"
NMLX-20-73 20 73 15 2.5"/2"
NMLX-25-70 25 70 15 2.5"/2"
NMLX-30-68 30 68 15 2.5"/2"
NMLX-50-25 50 25 11 2.5"/2"
NMLX-30-45 30 45 11 2.5"/2.5"
NMLX-40-45 40 45 11 2.5"/2.5"
NMLX-60-40 60 40 15 3"/2.5"